Thunder K8₄ — Tyan´s S4880 4-way Opterons board

AMDboard.com posted some specs of Tyan´s Thunder K8&sub4; board — S4880. According to the index, it can host 4 x Opteron 8xx processors in its µPGA 940 sockets. The board bases on AMD-8131 chipset, has 10 x 184-pin 2.5V DIMM sockets (4 for the 1st CPU and 2 for each of other three CPUs). The maximum memory capacity is 20GB of PC1600, PC2100, PC2700 registered ECC modules.

Brief specs:

• 2 x independent PCI-X buses
• 2 x 64-bit 66/33 MHz (3.3-Volt) PCI-X slots (PCI-X bridge A)
• 2 x 64-bit 100/66/33 MHz (3.3-Volt) PCI-X slots (PCI-X bridge B)
• 1 x 32-bit 33MHz PCI slot (5-Volt)
• FDD connector
• 2 x COM (DB-9), 1 x LPT (DB-25)
• PS/2 keyboard and mouse
• 2 x USB 1.1 headers
• 2 x USB v2.0 headers
• 2 x IDE
• ATI Rage XL PCI graphics
• Silicon Image SI3114 controller
• 4 x SATA 1.0 ports
• Broadcom BCM5704C LAN
• Extended ATX (330.2 x 406.4 mm)

And 2cpu.com has the board layout posted in its forum:

Write a comment below. No registration needed!