Thermaltake Giant III: more cooling for graphics cards
Thermaltake Technology announced its new cooling system for high-end graphics cards — Giant III.
Giant III bases on Giant II and is almost identical to such Zalman solutions, as ZM80. The Giant III differs by a dual heatsink fan (vs. the single of Giant II) and a blower for cooling the construction in general. The bundle also includes copper fins for memory modules and fan speed controller (occupying 1 x PCI slot on the back panel).
| Model |
A1919 |
| Heatsink |
Aluminium |
| Fan type |
Heatsink fan |
Blower |
| Size |
60x60x10mm |
40x40x40mm |
| Voltage |
12V |
12V |
| Starting voltage |
7V |
7V |
| Current |
0.35A |
0.35A |
| Consumption |
4.20W |
4.20W |
| Speed control |
H, M, L |
ON/OFF |
| RPM |
H: 5300 ± 10%
M:4200 ± 10%
L: 3000 ± 10% |
ON: 9000 ± 10%
OFF: 0 |
| Max. airflow |
22.3CFM |
3.53CFM |
| Max. air pressure |
3.68 mm H2O |
6.56 mm H2O |
| Noise |
H: 38 dBA
M: 30 dBA
L: 21 dBA |
ON: 41,6 dBA
OFF: 0 dBA |
| Bearing |
1 frictionless, 1 friction |
Friction |
| Life time |
40,000 hours |
30,000 hours |
| Connector |
4-pin |
3-pin |
| Heat exchanger |
Nickel-plated copper |
| Memory heatsinks |
8 copper units, 20x9x6mm |
For sale Giant III cooling systems should arrive in February 2004.
Write a comment below. No registration needed!
|
|
