Super Talent Ships New TeraDrive CT SATA 3Gbps SSDs based on SandForce SSD Processor
Super Talent Technology announced immediate availability of the new TeraDrive CT SSD, which uses the SandForce 1222 SSD processor to deliver improved performance in laptops and desktops.
The new TeraDrive CT has a standard SATA 3Gbps interface. It delivers sequential read and write speeds up to 285 MB/s and 275 MB/s respectively. Built-in Garbage Collection and TRIM support ensure sustainable performance over the life of the drive, without degradation.
The TeraDrive CT features RAISETM technology for enhanced reliability and DuraWrite technology for significantly increased endurance, advanced wear leveling, bad block management, and excellent ECC with up to 24 symbols correctable per 512 byte sector. The TeraDrive CT, built with MLC NAND flash, uses new improved firmware that yields greater usable capacity than earlier 1222 based SSDs. It is offered in capacities from 60GB to 480GB.
- Interface: Serial ATA 3Gbps
- Form Factor: 2.5"
- Capacities: 60GB, 120GB, 240GB, 480GB
- NAND Flash: MLC
- Performance: 0.1ms access time
- Performance: 285 MB/sec read, 275 MB/sec write
- Internal Cache Size: N/A
- Power Supply: 5V ± 5%
- MTBF: >1,000,000 hrs
- Dimension: 69.85 x 100.20 x 9.50 mm
- Warranty: 2 years
- Part Number: FTMxxCT25H
||60GB 2.5" MLC SATA TeraDrive CT SSD
||120GB 2.5" MLC SATA TeraDrive CT SSD
||240GB 2.5" MLC SATA TeraDrive CT SSD
||480GB 2.5" MLC SATA TeraDrive CT SSD
Source: Super Talent Technology
ASUS Launches R9 200, R7 200 Series, Matrix R9 280X Graphics Cards
Apacer Launches SATA SLC-lite SSD solutions
ADATA Introduces a Stylish External HDD HC630
Samsung Introduces New Wireless Multiroom Speakers
WD Gives Consumers a Cloud of Their Own
Write a comment below. No registration needed!