September 2002 3Digest - ATI RADEON 8500LE (183/366 MHz)

This chip is presented by PowerColor RADEON 8500LE 64MB (183/366 MHz), AGP card.

Features:

ATI RADEON 8500LE chip, 183 MHz clock rate;
64MB DDR SDRAM memory in 8 Hynix 5ns microchips, 183 (366) MHz clock rate, 128-bit bus;
Peak fill rate in the multitexturing mode is 732 megapixels/sec and 1464 megatexels/sec.

Wasn't overclocked.

So, it's the penultimate-generation High-End product from ATI (RADEON 9700 has been announced, but was unavailable to testers). Those willing to get some detailed information should read RADEON 8500 review. Certainly, being one of the fastest accelerators, this card aspires to compete with NVIDIA GeForce3. Our review showed this competition to be rather controversial as even GeForce3 Ti 200 and not only GeForce3 Ti wins in a number of games, but RADEON 8500 has the great advantage in some tests. But it seems ATi has lots of wastes incapable of operating at 275, 250, and even 230 MHz. So, now we see such "stumps" clocked at 183/183 (366) MHz. They are produced only by ATI partners.

On the 10th of September 2002 the latest drivers from ATI are 6.143, 6.159, 6.166 for Windows XP.

I shall note there's Radeon2.ru web-site that tracks all software novelties from ATI and offers improved drivers versions with preset registry settings for increasing RADEON cards perfomance.

As the drivers differences are equal for the both RADEON 8500 cards with DDR memory, there's no sense in comparing drivers separately for each of these cards. See ATI RADEON 8500 (275 MHz) section for more information about drivers.

Some versions have problems with refresh rate setting in some resolutions.

And now I want to attract your attention to another important 3D feature - filtering. As many of you know, all chipsets support bilinear filtering that is an important instrument in MIP-mapping, some chipsets support trilinear filtering (true, not the approximation) and only few support anisotropic filtering.

Due to the fact that Radeon does support anisotropic filtering, I recommend you to pay attention to the article concerning this feature. You should read it attentively, as the ATI anisotropy is very ambiguous.

As there are no real application using Pixel Shaders 1.4. So, below are some demonstrations of one of water realization methods based on Pixel Shaders 1.4. you may compare these shots with X-Isle's water in the GeForce3 section, for example.

Pity again, but it's still impossible to demonstrate this technology at work on examples of games or demos. The same X-Isle uses NVIDIA cards specificial OpenGL extensions disabling this demo on non-GeForce cards. Certainly, the above demo was made with PS 1.4, so it works with RADEON 8500 only. You can also pay attention to the new 3DMark2001 SE with pixel shaders v1.4 test. Read more about it in the Gigabyte MAYA RADEON 8500 review.

Nevertheless, these technics allow to create masterpieces of 3D-graphics:

As it's known RADEON 8500 supports very interesting feature and advantage - N-Patches technology called TruForm. All details are in our R200 analysis and in mentioned RADEON 8500 review. Screenshots below demonstrate TruForm capabilities for creating a detailed human face.

I want to recommend to read the review of Review of SuperGrace RADEON 7500/8500, describing TRUEFORM technology in detail on the example of Serious Sam.

Below are some screenshots taken on RADEON and reference ones taken on NVIDIA GeForce3.