« Back to i3DSpeed

On the example of a reference AMD Radeon HD 7970 3072MB 384-bit DDR5 (925/925/5500 MHz).

Features:

• GPU: Radeon HD 7970 (Tahiti XT)
• Interface: PCIe 3.0 x16
• GPU clock rate (ROPs/shaders): 925 MHz (standard)
• Memory clock rate, physical (effective): 1375 (5500) MHz (standard)
• Memory bus: 384-bit
• Stream processors: 2048
• Texture units: 128 (BLF/TLF/ANIS)
• ROP units: 32
• Dimensions: 275x100x33 mm
• Board color: red
• Display connectors: Dual-Link DVI, HDMI 1.4a, 2 x Mini DisplayPort 1.2
• Multi-GPU mode: hardware CrossFireX

This card has two BIOS chips and a selector switch. This should help fix unsuccessful firmware upgrades. The first BIOS chip is select by default.

This card features its own audio codec, so nothing else is required to output audio to HDMI.

This card has two supplementary power connectors: one 6-pin and one 8-pin.

This card should come supplied with DP-to-DVI adapters, so from now on you won't need DisplayPort-equipped monitors to use Eyefinity. Each new DisplayPort 1.2 interface allows outputting signal to three monitors by means of a special hub. So two such interfaces allow connecting six monitors at once.

Maximum resolutions and frequencies:

• 240 Hz maximum refresh rate
• 2560 x 1600 @ 60Hz max. digital resolution
• 2048 x 1536 @ 85Hz max. VGA resolution

We thank AMD for the provided graphics card.

« Back to i3DSpeed

Write a comment below. No registration needed!