i3DSpeed, April 2013
NVIDIA GeForce GTX 660 Ti 2048 MB 192-bit GDDR5 (915-1015/6000 MHz)
Andrey Vorobiev; May 20, 2013
|
|
|
« Back to i3DSpeed
On the example of Palit JetStream GeForce GTX 660 Ti 2048MB 192-bit GDDR5 (915-1015/6000 MHz).
Features:
- GPU: GeForce GTX 660 Ti (GK104)
- Interface: PCIe 3.0 x16
- GPU clock rate (ROPs/shaders): 1008-1100/1008-1100 MHz (the standard is 915-980/915-1030 MHz)
- Memory clock rate, physical (effective): 1525 (6100) MHz (the standard is 1500 (6000) MHz)
- Memory bus: 192-bit
- Stream processors: 1344
- Texture units: 112 (BLF/TLF/ANIS)
- ROP units: 24
- Dimensions: 247x112x33 mm
- Board color: black
- Power consumption (3D peak/2D/idle): 161/59/44 W
- Display connectors: Dual-Link DVI-I, Dual-Link DVI-D, HDMI, DisplayPort
- Multi-GPU mode: hardware SLI
This card has two 6-pin supplementary power connectors.
How does one make a graphics card with a 192-bit bus and yet with 2GB of video memory? Usually, 2048MB are provided by 8 x 2Gbit chips handled by a 256-bit bus. To use a 192-bit bus and still have 2GB video memory, one would need something like 12 memory chips of different capacity. However, in this case we see 8 x 2Gbit memory chips, yet two of the three 64-bit memory controllers work as usual, each with 2 memory chips (2 x 32-bit = 64-bit), and the third controller works with 4 memory chips (4 x 16-bit = 64-bit). This is obviously cheaper than going with 12 memory chips.
Maximum resolutions and frequencies:
- 240 Hz maximum refresh rate
- 2560 x 1600 @ 60Hz max. digital resolution
- 2048 x 1536 @ 85Hz max. VGA resolution
« Back to i3DSpeed
Write a comment below. No registration needed!
|
|