Lian Li Introduces PC-P80N, PC-Z70, PC-Z60 Aluminum PC Chassis Lian Li launched three new computer cases: the mid-tower PC-Z60, the full-tower PC-Z70, and the full-tower PC-P80N inspired by Lian Li's classic Armorsuit PC-P80 released in 2008. These high-end, all-black PC chassis are now available. All three cases are made with Lian Li's trademark features like tool-less installations for HDDs, ODDs, PSUs, graphics cards etc., washable air filters over fans, anti-vibration mounts, cable clamps, ventilation, USB 3.0 connectivity, fan speed controllers, rubber-ringed holes for LCS, and all-black anodized aluminum. PC-P80N PC-P80N. Users can choose to mount HPTX, EATX, ATX, Micro-ATX or Mini-ITX motherboards in this full-tower PC case. With eleven ventilated expansion slots, users can mount graphics cards as long as 390-mm long. Components are kept cool by no less then six fans. Three 140-mm fans that span the entire height of the front panel pull cool air into the chassis. Two 140-mm fans on the top panel and one 120-mm fan at the top of the rear panel blow heated air out of the case. For thermal-optimization, the front panel intake fans are hinged and directly in front of three 5.25" ODD mounts, ten 3.5" HDD mounts, and two 2.5" HDD mounts. Users can hinge the fans to swing to the right or left for easy access to the ODDs. The top panel is home to four USB 3.0 ports, one e-SATA port, and HD audio ports. Lian Li includes a USB 3.0 to USB 2.0 converter as well. The dimensions of the PC-P80N stand at 220mm x 633mm x 610mm (W, H, D). PC-Z70 PC-Z70. Besides being available in black this full-tower PC chassis is also available in silver and mounts HPTX, EATX, ATX, or Micro-ATX motherboards. Eleven ventilated PCI expansion slots on the back panel can mount graphics cards as long as 390mm long. Three 5.25" ODD bezels are located at the top of the front panel. Below them, internally, there are nine 3.5" SATA hot-swappable HDD mounts as well as two 2.5" HDD mounts. Lian Li has added to the security of this case by including a lock for the HDD mounts. Three 120-mm intake fans mount on either the left or right side panel, for direct airflow over the HDD mounts. Two 120-mm fans on the top panel and one 120-mm fan at the top of the rear panel work as exhaust fans to expel hot air. Along a sloped ridge that joins the top and front panels, the I/O ports are all mounted for convenient access including: two USB 3.0 ports, one USB 2.0 port, one e-SATA port, as well as HD audio ports. The dimensions of the PC-Z70 stand at 220mm x 600mm x 592mm (W, H, D). The net weight is 8.8kg. PC-Z60 PC-Z60. This mid-tower chassis is nicknamed "little brother," because of its remarkable similarity to the PC-Z70. Available in black and silver, the PC-Z60 mounts ATX, Micro-ATX, or Mini-ITX motherboards and has eight expansion slots with enough room for graphics cards as long as 305mm long. Three 5.25" ODD bezels are located at the top of the front panel. Below them, internally, there are six 3.5" SATA hot-swappable HDD mounts as well as two 2.5" HDD mounts. Like its big brother, the PC-Z60 also comes equipped with a security lock for the HDD rack. The fans are set-up similarly as well, with two 120-mm fans that mount on either side panel for air intake, complimented by one 120-mm exhaust fan on the top panel and one 120-mm exhaust fan at the top of the rear panel. Like the PC-Z70, the I/O ports are located along a sloped ridge that joins the top and front panels for convenience. Ports match the PC-Z70 exactly and include: two USB 3.0 ports, one USB 2.0 port, one e-SATA port, as well as HD audio ports. The dimensions of the PC-Z60 stand at 210mm x 472mm x 480mm (W, H, D). Source: Lian Li
Write a comment below. No registration needed!
|
Platform · Video · Multimedia · Mobile · Other || About us & Privacy policy · Twitter · Facebook Copyright © Byrds Research & Publishing, Ltd., 1997–2011. All rights reserved. |