IWILL announces DJ800 and DN800 motherboards for Xeon processors
Yet another company announced today its motherboards for Intel Xeon processors supporting EM64T (Nocona-based). This time it´s IWILL with DJ800 and DN800 boards. Both are designed for high-performance workstations, based on Intel E7525 chipset and differ by form-factors and expansion features.
IWILL DJ800 EATX board supports 2 x CPUs, has Intel ICH5R Southbridge, Adaptec SATA (optional Adaptec ZCR for up to 6 x SATA ports with RAID0, 1, 0+1), dual-channel DDR2-400 with ECC (up to 16GB). The board also has 1 x PCI Express 16x slot, 1 x PCI Express x4 slot, 1 x Intel Gigabit NIC port, 1 x 64-bit PCI-X 133 MHz slot, 2 x 64-bit PCI-X 100 MHz slots, 1 x 32-bit PCI 33 MHz slot, 8 x USB 2.0, 2 x IEEE1394a ports, and S/PDIF output.
IWILL DN800 ATX model has Intel 6300ESB controller, Adaptec SATA (2 ports with RAID 0, 1), dual-channel DDR333 with ECC (up to 8GB). The board has 1 x PCI Express x16 slot, 1 x PCI Express x4 slot, 1 x Intel Gigabit NIC port, 1 x Broadcom PCI Express GbE (Gigabit Ethernet) port, 2 x 64-bit PCI-X 66 MHz slots, 1 x 32-bit PCI 33 MHz slot, 4 x USB 2.0, 2 x IEEE1394a ports, 5.1-channel audio output.
Write a comment below. No registration needed!
|
|